View Single Post
  #2   Report Post  
Posted to rec.audio.tech
Don Pearce[_3_] Don Pearce[_3_] is offline
external usenet poster
 
Posts: 2,417
Default Infinity Composition Overture 1 Question

On Sat, 23 Mar 2019 15:02:55 -0700 (PDT), wrote:

Fuse continued to blow on the subwoofer amp so I opened things up. The component marked MOV1 on the PCB looks to be totally melted. It is called out as a Varistor 200V (Part #VA1009).

My thought was just to replace this component. Any thoughts? Thank you.

John


Go ahead and do that, but if an MOV has melted it is likely you
suffered a surge big enough to damage the rest of the power supply.
You'll need to decide if it is worth replacing parts, so initially
just remove the remains of the MOV and power it up again.

The next parts to test are the bridge rectifier and large electrolytic
capacitor. After that it gets a bit more specific and impossible to
diagnose at a distance.

d