On Saturday, December 30, 2017 at 7:00:28 AM UTC-5, Mike Rivers wrote:
On 12/29/2017 9:45 PM, wrote:
I'm looking for technical info for an old monitor panel.
It has a 6x9 speaker, VU meter, transformer, selector switch, variable pad an a bunch of barrier strips on the back.
It is listed as MODEL TCP-MON Series H*o8*81.
Are the barrier strips labeled, or is that what you want to know about?
You can probably guess what it does - switch several sources to the
speaker and VU meter. If you can find an input, put a signal in and
experiment to find what it takes to hear it and see the meter move.
--
For a good time, call http://mikeriversaudio.wordpress.com
Yes, that is clear, the switch selects the input from the barrier strip.
I want to know if it is intended to connect to an 8 ohm system or to a 70V system.
It has a transformer and the speker itself is 8 Ohm.
The volume is too low when I connect it to the 8 Ohm line. I re-connected it to the 70v line and the volume is acceptable and nothing has blown up yet. I just wanted to check that this is going to be ok long term.
Mark