Arny Krueger wrote:
"Daniel" wrote in message
ps.com
Arny Krueger wrote:
"Daniel" wrote in message
oups.com
Hi,
I need to put a new pinch roller on my TASCAM 58 tape
machine but before doing so, I need to remove the 2
bearings, a spring and something called a "C-Ring" from
inside of the pinch roller. I was able to easily remove
all of the above but I don't know how to remove the
c-ring. What tool do I need and what is the procedure ?
I've attached a picture below:
http://members.shaw.ca/ftp_pro/pinch.jpg
Thank you for your time and help.
You need an internal snap ring pliers like this one:
http://www.toolking.com/productinfo.aspx?productid=4028
WOW! Quick answer, thanks!! So I guess I just clamp it so
that the two sides come together and then pull out ?
Bingo!
Great! Thanks again for the quick help!