use roland cube street amp headphone out as line out?
On Monday, June 8, 2015 at 12:27:31 PM UTC+1, wrote:
On Friday, 5 March 2010 22:17:02 UTC+11, Jack Jarmush wrote:
Hello good people, I use a Roland Street Cube amp for guitar and vox
on small gigs and busking, it serves me well except there is no line
out so i can't plug into the house sound board in the pub (where they
demand to plug into their system so they can control the volume and
spread the sound evenly throughout the pub with there speaker system).
I want to use the Street Cube as a monitor/amp. How can i unmute the
headphone out so i can use it as a line out and still hear the amp?
Any advise is greatly appreciated. JJ
Who knows if this is useful now so long since original post, but .....
I used another method to create a line out. Bought a Response (brand) Speaker (High level) to Line Level converter (about $15) and installed it in the Cube by soldering wires onto the speaker wires and then drilling a hole in the back of the unit (there is room under the delay/reverb on the mic/line channel) and fitting a "Line Out" jack there. It is great using the cube as foldback for my vocal and guitar when playing with the band and a P.A. It also keeps my Vocal/ Guitar mix as I set it in front of house and means that I only need one input on the desk/P.A. instead of 2, which can sometimes be handy with a smaller rig.
Hello, thanks a lot, it's a great idea
|