On 2/2/2015 8:23 PM, Fran Guidry wrote:
This certainly doesn't match my experience. If I use matched or
similarly sensitive mics and matched gain settings the S signal
is_much_ lower than the M signal and if this were not the case I
would start looking for my error.
Of course that makes sense since they're pointed so that the null is
toward what you're trying to record. However, I usually adjust the
preamp gain so that I get a good level out of the preamp and then adjust
the mid and +/- side mix for the stereo spread that I want.
--
For a good time, visit
http://mikeriversaudio.wordpress.com