Need advice: audio for live video
In the past when I've recorded audio for live video, I have carted my
DAW, audio interface, monitor, etc. to gigs and recorded it in 8
tracks. I then sync the audio up to the video and viola - I've gotten
pretty good results. I can certainly do this again.
However, I'd like to see if there's some easier way to get reasonable
audio for a video shoot. Alternatives I can think of:
- just shoot the video and use the audio from the camera's mic
(easiest)
- run the board and/or AT4050 mic into the camera (in stereo)
- record using just the AT4050 (I would need a phantom power source to
do this.
- get an portable, digital recorder and record with that
- bring my DAW
- any other ideas?
Thanks in advance.
Mike C
|