John Stone wrote:
I thought all your bi-amping adventures were done with the purpose of not
altering the original design of your AR3a's.
John, the various mod sites noted emphasize the need for a fixed
resistor in place of the pot, simply bypassing the adjustable function.
Yes, *maybe* get them out of the circuit, no, do not alter the overall
function of the circuit.
http://layneaudio.hypermart.net/AR3aXorig.gif shows the OEM crossover
arrangement. One may either bypass the wiper directly to the 0-ohms
position, or remove the pot inserting a 16-ohm resistor and tying the
correct leads at the 0-ohm position.
(above link courtesy Layne Audio)
Classic Speaker Pages:
http://www.classicspeakerpages.net/a...ar-3a/ar3a.htm
All sorts of information and suggestions.
Peter Wieck
Wyncote, PA