Hey, I recently ran into one of these too ($0.00, can't argue wit
that).
I emailed audiovox, here's the pinout:
(There are different versions of the ba-200, so I'm assuming they al
use the same wiring/pinout...)
if you look at the amp on the enclosure(right-side up... so the writin
goes left-right):
The top left pin is #1, beside it is #2, then #3.
The bottom left pin is #4, beside it is #5, then #6.
#1 Right speaker positive input
#2 Empty
#3 12 Volt Constant Power
#4 Left speaker positive input
#5 Remote turn on / Acc power input
#6 Ground
Now there's supposed to be a 15-amp fuse on pin #3 (12v constan
power).
Hope that helps.... oh yeah, the install manual is he
http://www.audiovox.com/manuals/owners/BA-200.pd
-
queue_bi
-----------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community
http://www.RealCarAudio.co
queue_bit's Profile:
http://www.realcaraudio.com/forums/m...nfo&userid=291
View this thread:
http://www.realcaraudio.com/forums/s...?threadid=1709