Glad to help. Alot of people want to know about this, but it should be
free - not sold as an ebay scam. So get the word out.

I got alot of emails from people that are now using this, it works, it
definitely works people! If you haven't tried it, go ahead, its easy.

Just to clarify the instructions:

AVIC-N2 lockout bypass: Underneath the MAIN unit (not the hideaway) is
a small silver sticker, peel this back. There are two contacts with
the label "R197". Drop a bit of solder between these to connect them.
Also, you must ground the Parking Brake wire.


AVIC-D1 lockout bypass: Find an extra Pioneer wire harness, and pull
one of the wires out. Or, if you do not use the A.ANT lead, pull that
out of the harness. In the AVIC-D1 harness, there is one open spot on
the connector (next to the ground wire). Put this wire into the open
spot on the connector, connect the other side to ground, then
re-connect the plug to the AVIC-D1. Also, you must ground the Parking
Brake wire.


Thats it, all there is to it, and all the lockouts are bypassed. In
fact, you do not even get the "parking brake" warning anymore.