I replaced the output transformer on this amplifier (see:
http://tinyurl.com/mf4u5) and as I was taking a look at the schematic, I
found something that looked quite odd to me. Here is the schematic:
http://www.ernieball.com/mmonline/te...s/2100-130.pdf

I noticed that the two speaker output jacks are wired in series. But what
would the consequences be if somebody inadvertently pulled out the speaker
plug? In that situation, both speaker jacks then become wired in series
effectively shorting out the output transformer. Can that be correct?

Thanks for your reply.
--
David Farber
David Farber's Service Center
L.A., CA