[polymod]

"Danny T" wrote in message
...
On Mar 5, 9:26 am, (Scott Dorsey) wrote:
In article
,
Jack Jarmush wrote:

Hello good people, I use a Roland Street Cube amp for guitar and vox
on small gigs and busking, it serves me well except there is no line
out so i can't plug into the house sound board in the pub (where they
demand to plug into their system so they can control the volume and
spread the sound evenly throughout the pub with there speaker system).
I want to use the Street Cube as a monitor/amp. How can i unmute the
headphone out so i can use it as a line out and still hear the amp?
Any advise is greatly appreciated. JJ

Get the fellow at your local TV repair shop to go in there and move
the wire so that the switch in the jack no longer disables the connection
to the speaker. It's a ten-minute job but requires careful soldering.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Are there really such thing as TV repair shops anymore? :-)

Absolutely.
There's two within 3 miles of my house. They service VCR's too.

Poly