View Single Post
  #2   Report Post  
Posted to rec.audio.tubes
Phil Allison[_3_] Phil Allison[_3_] is offline
external usenet poster
 
Posts: 500
Default Overvoltage protection


"Alex Pogossov"


In any case, an abrupt interruption of the plate current will cause a
voltage spike on the OPT primary. The stored magnetisation energy of
Lp*(Ia^2)/2 will have to be dissipated. Lp can be quite high in a decent
amp. If a load is connected, then the energy will be dissipated in the
load giving you a loud crack in the speaker. A residual smaller energy
stored in the leakage inductance Ls*(Ia^2)/2 will most likely be safely
dissipated in a snubber of say 2200pF+5K usually connected in parallel to
the OPT primary.

But what is the load is not connected? Then the huge magnetisation energy



** Why huge ???

If Lp is say 100H and Ia = 0.1A then how many Joules is that ?




..... Phil